Certs are generated on the host and there is currently an issue due to openssl version mispatch between Fedora 36 and CentOS Stream 8 which causes:
tools_awx_1 | ERROR 2022/11/15 17:09:17 could not load signing key file: unknown block type PRIVATE KEY
tools_awx_1 | ERROR 2022/11/15 17:09:17 could not load signing key file: unknown block type PRIVATE KEY
* Facts scaling fixes for large inventory, timing issue
Move save of Ansible facts to before the job status changes
this is considered an acceptable delay with the other
performance fixes here
Remove completely unrelated unused facts method
Scale related changes to facts saving:
Use .iterator() on queryset when looping
Change save to bulk_update
Apply bulk_update in batches of 100, to reduce memory
Only save a single file modtime, avoiding large dict
Use decorator for long func time logging
update decorator to fill in format statement
* Fixes#13119#13120 Cloud support & update brand
* rm base64 import to pass lint
* Update references across the board
* Removed final reference to CyberArk Conjur Secret Lookup
Once since it is defined as a CustomCommand subclass, and once because
it is an endpoint at the /api/v2/ level. With Python 3.11 argparse
has become more strict and will raise an exception when you try to
inject duplicate subparsers.
- enable schema upload to s3 bucket for feature branch
- add workflow to delete schema from s3 bucket when feature branch is deleted
Signed-off-by: Hao Liu <haoli@redhat.com>
Previously, in some cases, an InventoryUpdate sourced by an SCM project
would still run and be successful even after the project it is sourced
from failed to update. This would happen because the InventoryUpdate
would revert the project back to its last working revision. This
behavior is confusing and inconsistent with how we handle jobs (which
just refuse to launch when the project is failed).
This change pulls out the logic that the job launch serializer and
RunJob#pre_run_hook had implemented (independently) to check if the
project is in a failed state, and puts it into a method on the Project
model. This is then checked in the project launch serializer as well as
the inventory update serializer, along with
SourceControlMixin#sync_and_copy as a fallback for things that don't run
the serializer validation (such as scheduled jobs and WFJT jobs).
Signed-off-by: Rick Elrod <rick@elrod.me>
This takes some logic out of the queryset logic,
using some established assumptions about the task manager
if a job lands on a hybrid node (or is a project update) then
it will have the same controller and execution node
With that established, the queryset can be simplified
Really these could get any of the unified job template types, not just
system job templates, so importing e.g. a project with a schedule was
doing them in the wrong order.
Also, bump the timeout of the project update and make sure that we
stash it in the page cache even if it doesn't finish in 5 minutes.
when running `make ui-devel`. Previously they were going to
/awx_devel/awx/public/static, but that directory is no longer being
served up by nginx, which forced us to have to run `make
collectstatic` (or equivalent) to get the files to the right place.
More fun in the grafana dashboard. The rows organize the panels and are
collapsable. Also, tested with multiple nodes and fixed some
labeling issues when there are more than one node.
Update grafana alerting readme info and some fun prose about one of the
alerts as well as some reorganizing of the code for clarity.
finally, drop the time to fire for alerts because it's better to have them be a bit touchy so users can verify they work vs. not being sure.
* initial commit of hostname validation to InstanceSerializer
Co-authored-by: Cesar Francisco San Nicolas Martinez <cesarfsannicolasmartinez@gmail.com>
- Firstly -- add a bunch of unit tests for `update_scm_url`, because it
previously had none and desperately needed them.
- Secondly -- fix#12992 by adding back in IPv6 address brackets if they
existed in the first place when the function was called.
- Thirdly -- fix a related case where we disallowed IPv6 in URLs that
did not include the scheme.
Signed-off-by: Rick Elrod <rick@elrod.me>
Extrapolating reconciliation of desired and actual states to a function
Converting heave prefect related methods to user focus for query optimization
Converting from get_or_create to simply create
Added memory calculations for query optimization
* fix name to be consistent
this is not a mean, its the last value
so say that in the name
* add remaining capacity to dashboard
also make legends pretty with nice names
- stdout output on events was being double HTML entity encoded meaning
that all output with < and > was shown as literal "<" and ">"
Signed-off-by: Rick Elrod <rick@elrod.me>
The initial check performed case insensitive searches and the new method was case sensitive
The optimization of the new method is likely not going to contribute noticable slowness
This will enable us to provide more useful information for the user,
now that all user-triggered health checks are async.
Also, de-bounce the health check endpoint to not allow additional
health check tasks to be triggered when one is already in progress.
We don't specify defaults in the module (because it messes up Instance
updates because AWX things we are trying to change things to be the
default).
- Update the docs to remove the defaults that no longer exist
- Update tests to make them pass (oops)
- Fix tangentially related typo in Kind development docs
Signed-off-by: Rick Elrod <rick@elrod.me>
We were disabling the field when a user did not have sufficient permissions to create an Inventory. I updated this logic to check if a user has use permissions on the selected inventory before disabling the field.
typo in URL and in grafana alert rule
Important learning: no newlines in rules/equations
turns out datasourceUid can be set in prometheus_source.yml, and it can be anything we want. So I have set it to awx_alert, the PBFAnumbersetc value it was set to before was an autogenerated UID, and it would actually work just with that generated value, but because we want it to make sense, we're setting the value in prometheus_source.yml
finally, update the docs to be reflective of grafana docs and how to export new rules a user might want to add.
Co-authored-by: Elijah DeLee <kdelee@redhat.com>
- Prevents changing hostname, listener_port, or node_type for instances
that already exist
- API default node_type is execution
- API default node_state is installed
awx-web container does not have access to receptor socket, and the
execution node health check requires receptorctl.
This change runs the health check asynchronously in the task container.
After all jobs on the node are complete, delete the node then
broadcast the write_receptor_config task.
Also, make sure that write_receptor_config updates the state of links
that are in 'adding' state.
- allow the node_state to be set to deprovisioning
- set the links that touch the instance to removing
- only allow on K8S
- only allow to be done to execution nodes
- use dotted circles to represent `enabled: false`
- use solid circle stroke to represent `enabled: true`
- excise places where `Unavailable` node state is used in the UI.
add scaffolding for instance install_bundle endpoint
- add instance_install_bundle view (does not do anything yet)
- add `instance_install_bundle` related field to serializer
- add `/install_bundle` to instance URL
- `/install_bundle` only available for execution and hop node
- `/install_bundle` endpoint response contain a downloadable tgz with moc data
TODO: add actual data to the install bundle response
Signed-off-by: Hao Liu <haoli@redhat.com>
when a new remote execution/hop node is added
regenerate the receptor.conf for all control node to
peer out to the new remote execution node
Signed-off-by: Hao Liu <haoli@redhat.com>
Co-Authored-By: Seth Foster <fosterseth@users.noreply.github.com>
Co-Authored-By: Shane McDonald <me@shanemcd.com>
- node_state is now read only
- node_state gets set automatically to Installed in the create view
- raise a validation error when creating on non-K8S
- allow SystemAdministrator the 'add' permission for Instances
- expose the new listener_port field
- nodes with states Provisioning, Provisioning Fail, Deprovisioning,
and Deprovisioning Fail should bypass health checks and should never
transition due to the existing machinery
- nodes with states Unavailable and Installed can transition to Ready
if they check out as healthy
- nodes in the Ready state should transition to Unavailable if they
fail a check
Remove corresponding views for job instance_groups
Validate job_slice_count in API
Remove defaults from some job launch view prompts
the null default is preferable
Additionally, move the inventory-specific hacks of yesteryear
into the prompts_dict method of the WorkflowJob model
try to make it clear exactly what this is hacking and why
Correctly summarize label prompts, and add missing EE
Expand unit tests to apply more fields
adding missing fields to preserve during copy to workflow.py
Fix bug where empty workflow job vars blanked node vars (#12904)
* Fix bug where empty workflow job vars blanked node vars
* Fix bug where workflow job has no extra_vars, add test
* Add empty workflow job extra vars to assure fix
Removing try/except around instance_groups
Removing redefined execution_environment
Reordering labels/creds/igs/ee/etc
Removing special treatment for EEs when doing setattrs
Adding help_text to execution environments
Adding EE serializer on JobCreateScheduleSerializer
Remove if-not-data conditional from WFJTnode.can_change
these are cannonical for can_add, but this looks like a bug
Change JTaccess.can_unattach to call same method in super()
previously called can_attach, which is problematic
Better consolidate launch config m2m related checks
Test and fix pre-existing WFJT node RBAC bug
recognize not-provided instance group list on launch, avoiding bug where it fell back to default
fix bug where timeout field was saved on WFJT nodes after creating approval node
remove labels from schedule serializer summary_fields
remove unnecessary prefetch of credentials from WFJT node queryset
Fixes bug where Forks showed up in both default values and prompted values in launch summary
Fixes prompting IGs with defaults on launch
Make job tags and skip tags full width on workflow form
Fixes bug where we attempted to fetch instance groups for workflows
Fetch default instance groups from jt/schedule for schedule form prompt
Grab default IGs when adding a node that prompts for them
Adds support for saving labels on a new wf node
Fix linting errors
Fixes for various prompt on launch related issues
Adds support for saving instance groups on a new node
Adds support for saving instance groups when editing an existing node
Fix workflowReducer test
Updates useSelected to handle a non-empty starting state
Fixes visualizerNode tests
Fix visualizer test
Second batch of prompt related ui issues:
Fixes bug saving existing node when instance groups is not promptable
Fixes bug removing newly added label
Adds onError function to label prompt
Fixes tooltips on the other prompts step
Properly fetch all labels to show on schedule details
This removes a loop that ran on import
the loop was giving the wrong behavior
and it initialized too many fields as char_prompts fields
With this, we will now enumerate the char_prompts type fields manually
Adds support for prompting labels on launch in the UI
Fix execution environment prompting in UI
Round out support for prompting all the things on JT launch
Adds timeout to job details
Adds fetchAllLabels to JT/WFJT data models
Moves labels methods out to a mixin so they can be shared across JTs/WFJTs/Schedules
Fixes bug where ee was not being sent on launch
Adds the ability to prompt for ee's, ig's, labels, timeout and job slicing to schedules
Fixes bug where saving schedule form without opening the prompt would throw errors
Adds support for IGs and labels to workflow node prompting
Adds support for label prompting to node modal
Fix job template form tests
* Making almost all fields promptable on job templates and config models
* Adding EE, IG and label access checks
* Changing jobs preferred instance group function to handle the new IG cache field
* Adding new ask fields to job template modules
* Address unit/functional tests
* Adding migration file
Adds prompt on launch buttons to labels, forks, job slicing, timeout, and instance groups
Adds prompting for labels on workflow job template
Updates flags that denote when prompting is necessary in various places
Adds prompting support for timeout, job slicing, forks, labels, instance groups and execution environments to the prompt details
Show prompted ee, forks, job slice and labels on schedule details
Adds support for ee, labels, forks, job slicing and timeout prompting to the node view modal
Add default values when prompting for ee's, forks, job slicing and timeout
Adds launch prompt step for execution environments
Adds fields for timeout, job slicing and forks to other prompts step of launch
- Fix out of scope variable in error message in the action plugin
- Rename action plugin from playbook_integrity to verify_project
Refs #12887 which pointed out the out of scope variable
Signed-off-by: Rick Elrod <rick@elrod.me>
This rule alerts if the redis queue is larger than what the rolling
average event insertion rate/second * 120. In other words, if the redis
queue is larger than it appears we can process events in two minutes.
It appears it has to meet this condition for 60 seconds to start firing.
Future commits will address how to configure contact points like slack.
shout out to @jainnikhil30 and @rebeccahhh who figured this out in jam
session this morning.
When launching a job template, if the last project update failed due to
signature validation, show an error that actually says that.
Signed-off-by: Rick Elrod <rick@elrod.me>
This was missed when we landed #12813. Adds cryptography
kind to the CredentialType allowed kinds list, which now
produces the proper error message when attempting to PUT
to modify the managed credential type.
Signed-off-by: Rick Elrod <rick@elrod.me>
Rather than only allowing the signature credential to be specified on
project using git, allow it to be specified on any project at all.
This moves the field to always show, and moves it out of the git
subform.
Signed-off-by: Rick Elrod <rick@elrod.me>
add new managed credential type for gpg pub key
add migration file to setup managed credential types to add the new credential type
Signed-off-by: Hao Liu <haoli@redhat.com>
- Extract how slicing is done from Inventory#get_script_data and pull it
into a new method, Inventory#get_sliced_hosts
- Make use of this method in Inventory#get_script_data
- Make use of this method in Job#_get_inventory_hosts (used by
Job#start_job_fact_cache and Job#finish_job_fact_cache).
This fixes an issue (namely in Tower 4.1) where job slicing with fact
caching enabled doesn't save facts for all hosts.
Signed-off-by: Rick Elrod <rick@elrod.me>
If canceled attempted before, still allow attempting another cancel
in this case, attempt to send the sigterm signal again.
Keep clicking, you might help!
Replace other cancel_callbacks with sigterm watcher
adapt special inventory mechanism for this too
Get rid of the cancel_watcher method with exception in main thread
Handle academic case of sigterm race condition
Process cancelation as control signal
Fully connect cancel method and run_dispatcher to control
Never transition workflows directly to canceled, add logs
We should be consistent about this. Also this takes us from doing a as
many queries to the UnifiedJob table as we have instances to doing 1
query to the UnifiedJob table (and both do 1 query to Instances table)
Reasoning:
- This is breaking the UI in official image builds of devel
- This is always being overridden in our packaging
- PROJECTS_ROOT and JOBOUTPUT_ROOT also hardcode /var/lib/awx
Make it so that submitting a task to the dispatcher happens as part of the transaction.
this applies to dispatcher task "publishers" which NOTIFY the pg_notify queue
if the transaction is not successful, it will not be sent, as per postgres docs
This keeps current behavior for pg_notify listeners
practically, this only applies for the awx-manage run_dispatcher service
this requires creating a separate connection and keeping it long-lived
arbitrary code will occasionally close the main connection, which would stop listening
Stop sending the waiting status websocket message
this is required because the ordering cannot be maintained with other changes here
the instance group data is moved to the running websocket message payload
Move call to create_partition from task manager to pre_run_hook
mock this in relevant unit tests
Avoid running jobs that have already been reapted
Co-authored-by: Elijah DeLee <kdelee@redhat.com>
Remove unnecessary extra actions
Fix waiting jobs in other cases of reaping
add `make help`
that prints all available make targets
help text generated from comments above the make target starting with `##`
Signed-off-by: Hao Liu <haoli@redhat.com>
When on the screen in the UI that loads the job events, the ui includes
a filter to exclude job events where stdout = ''. Because this is a
TextField and was not in the allow list, we were applying DISTINCT to
the query. This made it very unperformant for large jobs, especially
on the query that gets the count and cannot put a LIMIT on the query.
Also correctly prefetch the related job_template data on the view to
cut down the number of queries we make from around 50 to under 10.
We need to analyze other similar views for other prefetch type
optimizations we should make.
* refactor ScheduleFormFields into own file
* refactor ScheduleForm
* wip complex schedules form
* build rruleset from inputs
* update schedule form validation for multiple repeat frequencies
* add basic rrule set parsing when opening schedule form
* complex schedule bugfixes, handle edge cases, etc
* fix schedule saving/parsing for single-occurrence schedules
* working with timezone issues
* fix rrule until times to be in UTC
* update tests for new schedule form format
* update ouiaIds
* tweak schedules spacing
* update ScheduleForm tests
* show message for unsupported schedule types
* default schedules to browser timezone
* show error type/message in ErrorDetail
* shows frequencies on ScheduleDetails view
* handles nullish values
* Forcing an unbind for a django-auth-ldap sticky session to the LDAP server
* Focring _connection_bound to false after closing and modifying exceptino logging
Introduce build_project_dir method
the base method will create an empty project dir for workdir
Share code between job and inventory tasks with new mixin
combine rest of pre_run_hook logic
structure to hold lock for entire sync process
force sync to run for inventory updates due to UI issues
Remove reference to removed scm_last_revision field
When creating unified job, stash the list of pk values from the
instance groups returned from preferred_instance_groups so that the
task management system does not need to call out to this method
repeatedly.
.preferred_instance_groups_cache is the new field
Instead of loading all pending Workflow Approvals in the task manager,
run a query that will only return the expired apporovals
directly expire all which are returned by that query
Cache expires time as a new field in order to simplify WorkflowApproval filter
We always add the job to the graph right before calling start task.
Reduce complexity of proper operation by just doing this in start_task,
because if you call start_task, you need to add it to the dependency
graph
we had tried doing this in the WorkflowManager, but we decided that
we want to handle ALL pending jobs and "soft blockers" to jobs with the
TaskManager/DependencyGraph and not duplicate that logic in the
WorkflowManager.
add settings to define task manager timeout and grace period
This gives us still TASK_MANAGER_TIMEOUT_GRACE_PERIOD amount of time to
get out of the task manager.
Also, apply start task limit in WorkflowManager to starting pending
workflows
more than saving the loop, we save building the WorkflowDag twice which
makes LOTS of queries!!!
Also, do a bulk update on the WorkflowJobNodes instead of saving in a
loop :fear:
implement https://github.com/ansible/awx/issues/12446
in development environment, enable set of views that run
the task manager(s).
Also introduce a setting that disables any calls to schedule()
that do not originate from the debug views when in the development
environment. With guards around both if we are in the development
environment and the setting, I think we're pretty safe this won't get
triggered unintentionally.
use MODE to determine if we are in devel env
Also, move test for skipping task managers to the tasks file
- DependencyManager spawns dependencies if necessary
- WorkflowManager processes running workflows to see if a new job is
ready to spawn
- TaskManager starts tasks if unblocked and has execution capacity
Change:
- Case-insensitive search only makes sense on strings, so check the
type of the field we are searching and ensure it is a string field
(TextField, CharField, or some subclass thereof).
- This prevents a 500 error when a user uses iexact on, e.g., an
integer field. Now, a 400 Bad Request is returned instead.
Test Plan:
- Added simple unit tests for iexact
Tickets:
- Fixes#9222
Signed-off-by: Rick Elrod <rick@elrod.me>
* Modifying SAML adapter to not auto-add default galaxy creds to orgs on login
* Adding test, fixing old tests and moving add_default_galaxy_credential to pipeline
* Enhanced detail component to handle cases with no values, and refactored components that use detail component.
* Add optional chaining operators where necessary to pass test cases
* add test cases to test suites of modified files
Co-authored-by: Veda Periwal <vperiwal@vperiwal-mac.attlocal.net>
This optimizes the ActivityStreamSerializer by only getting many-to-many
relationships that are speculatively non-empty
based on information we have in other fields
We run this every time we create an object as an on_commit action
so it is expected this will have a major impact on response times for launching jobs
fixes https://github.com/ansible/awx/issues/7946
- added WorkflowApprovalTemplate page type to allow URL registration
- added resources regex that’s associated resource URL with WorkflowApprovalTemplate
- registered the new resource regex with WorkflowApprovalTemplate page type
- modified `DEPENDENT_EXPORT` handling (insisted by @jbradberry)
- added special case handling for WorkflowApprovalTemplate due to its unique nature
unique nature of WorkflowApprovalTemplate
- when exporting WorkflowJobTemplate with approval node the WorkflowJobTemplateNode need to contain a related "create_approval_template" the POST data for "create_approval_template" need to come from the "workflow_approval_template"
- during the export of a WorkflowJobTemplateNode that is an approval node we need to get the data from "workflow_approval_template" and use that to populate the "create_approval_template"
Co-Authored-By: Jeff Bradberry <685957+jbradberry@users.noreply.github.com>
Signed-off-by: Hao Liu <haoli@redhat.com>
* Added help text to schedule form and detail with link to documentation
* Added test cases for help text in schedule form and detail
* Add help text to schedule form and detail with link to documentation
Co-authored-by: Veda Periwal <vperiwal@vperiwal-mac.attlocal.net>
* Reap jobs on dispatcher startup to increase clarity, replace existing reaping logic
* Exit jobs if receiving SIGTERM signal
* Fix unwanted reaping on shutdown, let subprocess close out
* Add some sanity tests for signal module
* Add a log for an unhandled dispatcher error
* Refine wording of error messages
Co-authored-by: Elijah DeLee <kdelee@redhat.com>
* add database connection to the metrics endpoint
* bump the counts collector version to 1.2
* check for postgresql as database so to not break the tests
* Track combined artifacts on workflow jobs
* Avoid schema change for passing nested workflow artifacts
* Basic support for nested workflow artifacts, add test
* Forgot that only does not work with polymorphic
* Remove incorrect field
* Consolidate logic and prevent recursion with UJ artifacts method
* Stop trying to do precedence by status, filter for obvious ones
* Review comments about sets
* Fix up bug with convergence node paths and artifacts
Adding standard subject line to triage_replies.md
Removing PR commit generated change log in favor of github auto-commit log
Updating some images
Adding AWX matrix chanel to IRC notifications
Adding references between operator and AWX releases
we've observed this in development and some users have reported experiencing 500's on /api/v2/metrics because of a key error here where a metric is missing from a certain instance
- listen specifically within awx/awx, so that changes in awxkit or
awx_collection don't trigger spurious reloads
- expand the exclude pattern to ignore the test directories
* Removing old awxbot files
* Removing security bug report as GitHub now shows the security piolicy from /SECURITY.md
* Changing feature_request from md to yml
* Adding additional options to bug report components andinstall method
* Removing old ISSUE_TEMPLATE.md
* Changing issue type and adding additional components
* Removing auto-generated change log
* Adding awx_collection and cli components
* Changing content search pattern for type labels
* Changing from collection to awx_collection tag and adding dependencies tag
* Adding unicode bug to bug repot to match feature unicode character
* Changing bug to bug or docs
* Remove docker on * and boot2docker infavor of docker development environmnet
* Create top level issue with: CoC, Enterprise, Top level help
* Remove old CODEOWNERS file
* Show add access button if it is a system admin
* Hide access button if the user is credential admin, org admin, but the
credential does not belong to any org.
* Show access button if the user is a credential admin, org admin, and
the credential is associated to an org.
* Show access button if the user is an org admin and the credential is
associated to the org.
All those permutations are allowed by the API RBAC.
This PR update UX to not allow the user to attempt to perform any
action that will raise an error when modifying access to the
credentials.
Update project status to reflect project update sync related to job
template that was launched with branch override.
We were displaying status of project sync itself, not from the project
update job as expected.
Also, rename `Project Status` to be `Project Update Status`.
See: https://github.com/ansible/awx/issues/11987
* Logout as User A and Login as User B redirects to `/home'
* Logout as User A and Login as User A redirects to `/home'
* Allow session to timeout as User A and Login as User A redirects to User A's last location
See: https://github.com/ansible/awx/issues/11167
grafana via prometheus.
This metric is a good indicator of how far behind the callback receiver
is. The higher the load the further behind/the greater the number of
seconds the metric will display.
This number being high may indicate the need for horizontal scaling in
the control plane or vertically scaling the number of callback
receivers.
This is particularly useful when you are using the @filepath version
of the flag, since otherwise there would be no way to issue the
command with multiple vars files.
Also, add `-e` as an alias to `--extra_vars`
- scm based inventory sources should launch project updates prior to
running inventory updates for that source.
- fixes scenario where a job is based on projectA, but the inventory
source is based on projectB. Running the job will likely trigger a
sync for projectA, but not projectB.
comments
Add details related workflow job on the work flow approval details
Remove not used prop isLoading, fix, and expand unit-tests related to
workflow approval details.
* Only use in-memory cache for database settings
Make necessary adjustments to monkeypatch
as it is very vunerable to recursion
Remove migration exception that is now redundant
Clear cache if a setting is changed
* Use dedicated middleware for setting cache stuff
Clear cache for each request
* Add tests for in-memory cache
* We observed daphne giving tracebacks when accessing logging settings.
Originally, configure tower in tower settings was no a suspect because
daphne is not multi-process. We've had issues with configure tower in
tower settings and multi-process before. We later learned that Daphne
is multi-threaded. Configure tower in tower was back to being a
suspect. We constructed a minimal reproducer to show that multiple
threads accessing settings can cause the same traceback that we saw in
daphne. See
https://gist.github.com/chrismeyersfsu/7aa4bdcf76e435efd617cb078c64d413
for that recreator. These fixes stop the recreation.
- The `z` option indicates that the bind mount content is shared among multiple containers.
- The `Z` option indicates that the bind mount content is private and unshared.
If multiple container attempt to mount the same directory `Z` option will cause a raise condition where only the last container started will have access to the file.
Ref: https://docs.docker.com/storage/bind-mounts/#configure-the-selinux-label
Signed-off-by: Hao Liu <haoli@redhat.com>
Now that we are adding popovers for details pages, I noticed a couple of
strings wrapping in odd places, update css to avoid that.
Also `word-break: break-word` was deprecated.
* Delay update of artifacts until final job save
Save tracebacks from receptor module to callback object
Move receptor traceback check up to be more logical
Use new mock_me fixture to avoid DB call with me method
Update the special runner message to the delay_update pattern
* Move special runner message into post-processing of callback fields
* Track host_status_counts and use that to process notifications
* Remove now unused setting
* Back out changes to callback class not needed after all
* Skirt the need for duck typing by leaning on the cached field
* Delete tests for deleted task
* Revert "Back out changes to callback class not needed after all"
This reverts commit 3b8ae350d218991d42bffd65ce4baac6f41926b2.
* Directly hardcode stats_event_type for callback class
* Fire notifications if stats event was never sent
* Remove test content for deleted methods
* Add placeholder for when no hosts matched
* Make field default be None, denote events processed with empty dict
* Make UI process null value for host_status_counts
* Fix tracking of EOF dispatch for system jobs
* Reorganize EVENT_MAP into class properties
* Consolidate conditional I missed from EVENT_MAP refactor
* Give up on the null condition, also applies for empty hosts
* Remove cls position argument not being used
* Move wrapup method out of class, add tests
* Added schedule_rruleset lookup plugin for awx.awx
* Added DB migration for rrule size
* Updated schedule docs
* The schedule API endpoint will now return an array of errors on rule validation to try and inform the user of all errors instead of just the first
* Remove committed_capacity field, delete supporting code
* Track consumed capacity to solve the negatives problem
* Use more verbose name for IG queryset
* move static methods used by task manager
These static methods were being used to act on Instance-like objects
that were SimpleNamespace objects with the necessary attributes.
This change introduces dedicated classes to replace the SimpleNamespace
objects and moves the formerlly staticmethods to a place where they are
more relevant instead of tacked onto models to which they were only
loosly related.
Accept in-memory data structure in init methods for tests
* initialize remaining capacity AFTER we built map of instances
* create a singular page with listed replies that can be copy and pasted for mailing list and bug scrub purposes
Co-authored-by: Alicia Cozine <879121+acozine@users.noreply.github.com>
I verified what Seth found in https://github.com/ansible/awx/pull/12052, but would really hate to lose this functionality. Curious if folks on the API team can try this and see if it works for them.
By using .only we select fewer columns, avoiding potentially large
fields that we never reference.
Also, small tweak to eliminate what was a duplicate dictionary of
hostname:instance, because we don't need build and carry two copies of
the same data.
Update when deleted is show on job details.
Some job types should not display inventory or projects, update when
showing those fields.
Also, update when displaying information when
those fields where deleted.
See: https://github.com/ansible/awx/issues/12008
and then switch from using order by ID as a fallback for all ordering and instead
just set instances ordering to ID as default to prevent
OrderedManyToMany fields ordering from being interrupted.
Escape name__regex and name__iregex. Escaping the value for those
keys when creating a smart inventory is a work around for the
pyparsing code on the API side for special characters. This will just
display an extra escape when showing the host_filter on details page.
* use new children-summary endpoint data to traverse job event tree
* update job output tests for new children summary data
* force flat mode if event child summary fails to load
* update childrenSummary data for endpoint changes
* don't add jobs to job tree until children summary loaded
* force job output into flat mode if job processing not complete
- returns a special view to output the total number of children (and
grandchildren) events for all parents events for a job
value is the number of total children of that event
- intended to be consumed by the UI, as an efficient way to get the
number of children for a particular event
- see api/templates/api/job_job_events_children_summary.md for more info
* Grafana notifications: Fix panel/dashboardId type
Latest grafana fails with
Error sending notification grafana: 400
[{"classification":"DeserializationError",
"message":"json: cannot unmarshal string into Go struct
field PostAnnotationsCmd.dashboardId of type int64"}]
So ensure the IDs are really int and not strings.
* Fix the dashboard/panelId=0 case
0 is avlaid valid for the ID's, so ensure to allow them.
* Update tests to new behavior
Panel/Dashboard Id fields are not sent if they where not requested.
Alos add tests for the ID=0 case.
* Simple patches to make jobs robust to database restarts
* Add some wait time before retrying loop due to DB error
* Apply dispatcher downtime setting to job updates, fix dispatcher bug
This resolves a bug where the pg_is_down property
never had the right value
the loop is normally stuck in the conn.events() iterator
so it never recognized successful database interactions
this lead to serial database outages terminating jobs
New setting for allowable PG downtime is shared with task code
any calls to update_model will use _max_attempts parameter
to make it align with the patience time that the dispatcher
respects when consuming new events
* To avoid restart loops, handle DB errors on startup with prejudice
* If reconnect consistently fails, exit with non-zero code
* Update runtime.yml
* Extending test_completness to include meta/runtime.yml and adding remaining missing modules from runtime.yml
Co-authored-by: quasd <quasd@users.noreply.github.com>
There was a race condition because the callback reciever tried to run this code:
File "/awx_devel/awx/main/management/commands/run_callback_receiver.py", line 31, in handle
CallbackBrokerWorker(),
File "/awx_devel/awx/main/dispatch/worker/callback.py", line 49, in __init__
self.subsystem_metrics = s_metrics.Metrics(auto_pipe_execute=False)
File "/awx_devel/awx/main/analytics/subsystem_metrics.py", line 156, in __init__
self.instance_name = Instance.objects.me().hostname
Before get_or_register was being called by the dispatcher.
Occasionally the create_partition will error with,
relation "main_projectupdateevent_20220323_19" already exists
This change wraps the db command into a try except block with its
own transaction
This JSONBlob field type is a wrapper around Django's new generic
JSONField, but with the database column type forced to be text. This
should behave close enough to our old wrapper around
django-jsonfield's JSONField and will avoid needing to do the
out-of-band database migration.
* We trigger notifications when the callback receiver processes the
playbook_on_stats event. This is the last event in ansible-playbook and
the process should exist very shortly after this event is emitted. The
trouble comes in with the isolated node feature. There is a management
playbook that runs periodically that pulls the events from the remote
node. It's possible that the management playbooks runs, gets the
playbook_on_stats event, but does not see that the playbook is finished
running. Therefore the job status is still seen as 'running' BUT we have
kicked of the notification for the job. The notification worker will
enter a loop waiting on the job to enter the finished state. In this
case the time it takes for the job to enter the finished state can be
long, roughly 2 * the management playbook run time.
* This new setting allows the user to increase the time that the
notification spends waiting for the job to enter the finished state.
Add related job templates to a couple of screens. Credential and
Inventory.
Also refactor the component already in place for Projects to be in sync
with the Job Templates screen.
See: https://github.com/ansible/awx/issues/5867
Add several changes to API and UI related to Instance Groups.
* Update summary_fields for DEFAULT_CONTROL_PLANE_QUEUE_NAME, and
DEFAULT_EXECUTION_QUEUE_NAME. Rely on API validation for those fields.
* Fix Instance Group list RBAC
* Add validation for a couple of fields on the Instance Groups endpoint
1. is_container_group
2. policy_instance_percentage
3. policy_instance_list
See: https://github.com/ansible/awx/issues/11130
Also: https://github.com/ansible/awx/issues/11718
This will hopefully get us past the unfortunate check against the
HostMetric table, which doesn't exist when you are upgrading from 3.8
to 4.x.
Additionally, guard against AUTH_LDAP_GROUP_TYPE not being in settings
for conf migration 0006.
- the default auto-increment primary key field type is now
configurable, and Django's check command issues a warning if you are
just assuming the historical behavior of using AutoField.
- Django 3.2 brings in automatic AppConfig discovery, so all of our
explicit `default_app_config = ...` assignments in __init__.py
modules are no longer needed, and raise a RemovedInDjango41Warning.
- upgrades
- Django 3.2.12
- pytz 2021.3 (from 2019.3)
- oauthlib 3.2.0 (from 3.1.0)
- requests-oauthlib 1.3.1 (from 1.3.0)
- django-guid 3.2.1 (from 2.2.1)
- django-solo 2.0.0 (from 1.1.3)
- django-taggit 2.1.0 (from 1.2.0)
- netaddr 0.8.0 (from 0.7.19)
- pyrad 2.4 (from 2.3)
- django-radius devel (from 1.3.3)
- future devel (from 0.16.0)
- django-guid, django-solo, and django-taggit are upgraded to fix the
AppConfig deprecation warning. FIXME: django-guid devel has the
fix, but it hasn't been released yet.
- Released versions of django-radius have a hard-coded pin to
future==0.16.0, which has a Python warning due to an improperly
escaped character. This is fixed in future devel, so for now we are
pinning to references to the git repos.
- netaddr had a bunch of Python syntax and deprecation warnings
* Process unresponsive and newly responsive hop nodes
* Use more natural way to zero hop node capacity, add test
* Use warning as opposed to warn for log messages
It previously depended on a private Django internal class that changed
with Django 3.1.
I've switched here instead to disabling the django-polymorphic
accessors to get the underlying UnifiedJob object for a Job, which due
to the way they implement those was resulting in N+1 behavior on
deletes. This gets us back most of the way to the performance gains
we achieved with the custom collector class. See
https://github.com/django-polymorphic/django-polymorphic/issues/198.
- FieldDoesNotExist now has to be imported from django.core.exceptions
- Django docs specifically say not to import
django.conf.global_settings, which now has the side-effect of
triggering one of the check errors
The event_data field on event models, however, is getting an
overridden version that retains the underlying text data type for the
column, to avoid a heavy data migration on those tables.
Also, certain of the larger tables are getting these fields with the
NOT NULL constraint turned off, to avoid a long migration.
Remove the django.utils.six monkey patch we did at the beginning of
the upgrade.
- inspect.getargspec() -> inspect.getfullargspec()
- register pytest.mark.fixture_args
- replace use of DRF's deprecated NullBooleanField
- fix some usage of naive datetimes in the tests
- fix some strings with backslashes that ought to be raw strings
- Django's PostgreSQL JSONField wraps values in a JsonAdapter, so deal
with that when it happens. This goes away in Django 3.1.
- Setting related *_id fields clears the actual relation field, so
trying to fake objects for tests is a problem
- Instance.objects.me() was inappropriately creating stub objects
every time while running tests, but some of our tests now create
real db objects. Ditch that logic and use a proper fixture where needed.
- awxkit tox.ini was pinned at Python 3.8
- upgrades
- Django 3.0.14
- django-jsonfield 1.4.1 (from 1.2.0)
- django-oauth-toolkit 1.4.1 (from 1.1.3)
- Stopping here because later versions have changes to the
underlying model to support OpenID Connect. Presumably this can
be dealt with via a migration in our project.
- django-guid 2.2.1 (from 2.2.0)
- django-debug-toolbar 3.2.4 (from 1.11.1)
- python3-saml 1.13.0 (from 1.9.0)
- xmlsec 1.3.12 (from 1.3.3)
- Remove our project's use of django.utils.six in favor of directly
using six, in awx.sso.fields.
- Temporarily monkey patch six back in as django.utils.six, since
django-jsonfield makes use of that import, and is no longer being
updated. Hopefully we can do away with this dependency with the new
generalized JSONField brought in with Django 3.1.
- Force a json decoder to be used with all instances of JSONField
brought in by django-jsonfield. This deals with the 'cast to text'
problem noted previously in our UPGRADE_BLOCKERS.
- Remove the validate_uris validator from the OAuth2Application in
migration 0025, per the UPGRADE_BLOCKERS, and remove that note.
- Update the TEMPLATES setting to satisfy Django Debug Toolbar. It
requires at least one entry that has APP_DIRS=True, and as near as I
can tell our custom OPTIONS.loaders setting was effectively doing
the same thing as Django's own machinery if this setting is set.
The Member role can derive from e.g. the Org Admin role, so basically
all organization and team roles should be assigned first, so that RBAC
conditions are met when assigning later roles.
This is to avoid references to settings in threads,
this is known to create problems when caches expire
this leads to KeyError in environments with heavy load
* Fix integer/float errors in survey
* Add SURVEY_TYPE_MAPPING to constants
Add SURVEY_TYPE_MAPPING to constants, and replace usage in a couple of
files.
Co-authored-by: Alexander Komarov <akomarov.me@gmail.com>
* Changing session cookie name and added a way for clients to know what the key name is
* Adding session information to docs
* Fixing how awxkit gets the session id header
Right now, without this, we end up with a different number for max_workers than max_forks. For example, on a control node with 16 Gi of RAM,
max_mem_capacity w/ 100 MB/fork = (16*1024)/100 --> 164
max_workers = 5 * 16 --> 80
This means we would allow that control node to control up to 164 jobs, but all jobs after the 80th job will be stuck in `waiting` waiting for a dispatch worker to free up to run the job.
Sharing the /etc/redhat-access-insights is no longer
required for EEs. Furthermore, this fixes a SELinux issue
when launching multiple jobs with concurrency and fact_caching enabled.
i.e:
lsetxattr /etc/redhat-access-insights: operation not permitted
fix memory and cpu settings to suport k8s resource request format
* fix conversion of memory setting to bytes
This setting has not been getting set by default, and needed some fixing
up to be compatible with setting the memory in the same way as we set it
in the operator, as well as with other changes from last year which
assume that ansible runner is returning memory in bytes.
This way we can start setting this setting in the operator, and get a
more accurate reflection of how much memory is available to the control
pod in k8s.
On platforms where services are all sharing memory, we deduct a
penalty from the memory available. On k8s we don't need to do this
because the web, redis, and task containers each have memory
allocated to them.
* Support CPU setting expressed in units used by k8s
This setting has not been getting set by default, and needed some fixing
up to be compatible with setting the CPU resource request/limits in the
same way as we set it in the resource requests/limits.
This way we can start setting this setting in the
operator, and get a more accurate reflection of how much cpu is
available to the control pod in k8s.
Because cpu on k8s can be partial cores, migrate cpu field to decimal.
k8s does not allow granularity of less than 100m (equivalent to 0.1 cores), so only
store up to 1 decimal place.
fix analytics to deal with decimal cpu
need to use DjangoJSONEncoder when Decimal fields in data passed to
json.dumps
There is no current need or use to keep a seperate dependency graph for
each instance group. In the interest of making it clearer what the
current code does, eliminate this superfluous complication.
We are no longer ever referencing any accounting of instance group
capacity, instead we only look
at capacity on intances.
* Select control node before start task
Consume capacity on control nodes for controlling tasks and consider
remainging capacity on control nodes before selecting them.
This depends on the requirement that control and hybrid nodes should all
be in the instance group named 'controlplane'. Many tests do not satisfy that
requirement. I'll update the tests in another commit.
* update tests to use controlplane
We don't start any tasks if we don't have a controlplane instance group
Due to updates to fixtures, update tests to set node type and capacity
explicitly so they get expected result.
* Fixes for accounting of control capacity consumed
Update method is used to account for currently consumed capacity for
instance groups in the in-memory capacity tracking data structure we initialize in
after_lock_init and then update via calculate_capacity_consumed (both in
task_manager.py)
Also update fit_task_to_instance to consider control impact on instances
Trust that these functions do the right thing looking for a
node with capacity, and cut out redundant check for the whole group's
capacity per Alan's reccomendation.
* Refactor now redundant code
Deal with control type tasks before we loop over the preferred instance
groups, which cuts out the need for some redundant logic.
Also, fix a bug where I was missing assigning the execution node in one case!
* set job explanation on tasks that need capacity
move the job explanation for jobs that need capacity to a function
so we can re-use it in the three places we need it.
* project updates always run on the controlplane
Instance group ordering makes no sense on project updates because they
always need to run on the control plane.
Also, since hybrid nodes should always run the control processes for the
jobs running on them as execution nodes, account for this when looking for a
execution node.
* fix misleading message
the variables and wording were both misleading, fix to be more accurate
description in the two different cases where this log may be emitted.
* use settings correctly
use settings.DEFAULT_CONTROL_PLANE_QUEUE_NAME instead of a hardcoded
name
cache the controlplane_ig object during the after lock init to avoid
an uneccesary query
eliminate mistakenly duplicated AWX_CONTROL_PLANE_TASK_IMPACT and use
only AWX_CONTROL_NODE_TASK_IMPACT
* add test for control capacity consumption
add test to verify that when there are 2 jobs and only capacity for one
that one will move into waiting and the other stays in pending
* add test for hybrid node capacity consumption
assert that the hybrid node is used for both control and execution and
capacity is deducted correctly
* add test for task.capacity_type = control
Test that control type tasks have the right capacity consumed and
get assigned to the right instance group
Also fix lint in the tests
* jobs_running not accurate for control nodes
We can either NOT use "idle instances" for control nodes, or we need
to update the jobs_running property on the Instance model to count
jobs where the node is the controller_node.
I didn't do that because it may be an expensive query, and it would be
hard to make it match with jobs_running on the InstanceGroup which
filters on tasks assigned to the instance group.
This change chooses to stop considering "idle" control nodes an option,
since we can't acurrately identify them.
The way things are without any change, is we are continuing to over consume capacity on control nodes
because this method sees all control nodes as "idle" at the beginning
of the task manager run, and then only counts jobs started in that run
in the in-memory tracking. So jobs which last over a number of task
manager runs build up consuming capacity, which is accurately reported
via Instance.consumed_capacity
* Reduce default task impact for control nodes
This is something we can experiment with as far as what users
want at install time, but start with just 1 for now.
* update capacity docs
Describe usage of the new setting and the concept of control impact.
Co-authored-by: Alan Rominger <arominge@redhat.com>
Co-authored-by: Rebeccah <rhunter@redhat.com>
Modify usage of ansible_facts on advanced search, once `ansible_facts`
key is selected render a text input allowing the user to type special
query expected for ansible_facts.
This change will add more flexibility to the usage of ansible_facts when
creating a smart inventory.
See: https://github.com/ansible/awx/issues/11017
--- Removed all callback functions from 'jobs.py' and put them in a new file '/awx/main/tasks/callback.py'
--- Modified Unit tests unit moved
--- Moved 'update_model' from jobs.py to /awx/main/utils/update_model.py
Bump react scripts to 5.0
See: https://github.com/ansible/awx/issues/11543
Bump eslint
Bump eslint and related plugins
Add @babe/core
Add @babe/core remove babel/core.
Rename .eslintrc to .eslintrc.json
Rename .eslintrc to .eslintrc.json
Add extra plugin
Move babe-plugin-macro as dev dependencies
Move babe-plugin-macro as dev dependencies
Add preset-react
Add preset-react
Fixing lint errors
Fixing lint errors
Run eslint --fix
Run eslint --fix
Turn no-restricted-exports off
Turn no-restricted-exports off
Revert "Run eslint --fix"
This reverts commit e760885b6c199f2ca18091088cb79bfa77c1d3ed.
Run --fix
Run --fix
Fix lint errors
Also bump specificity of Select CSS border component to avoid bug of
missing borders.
Also update API tests related to lincenses.
Modifying workflows to install python for make commands
Squashing CI tasks to remove repeated steps
Modifying pre-commit.sh to not fail if there are no python file changes
The most notable change here is the removal of the conditional in
process_request. I don't know why we were preferring REQUEST_URI over
PATH_INFO. When the app is running at /, they are always the same as far as I
can tell. However, when using SCRIPT_NAME, this was incorrectly setting path and
path_info to /myprefix/myprefix/.
* Update saml.md
- Updated link to python documentation
- Added instructions for superadmin permissions
Co-authored-by: John Westcott IV <john.westcott.iv@redhat.com>
vars in ansible/instantiate-awx-deployment.yml in awx-operator repo appear to have been updated, because when we used the `tower_...` vars, they did not apply
It has no way of knowing whether a later command will fix the
situation, and this will come up in the installer. Let's just trust
the pre-flight checks.
Django ORM method get_or_create() does not call save() directly,
but it calls the create() [1].
The create method ignores the skip_update=True option, which then
will trigger a project update, however the EE was not yet created
in the database.
To avoid this problem, we just check the existence of the default
project and creates it with save(skip_update=True) manually.
* update StatusLabels on job detail
* change StatusIcon to use PF circle icons
* change status icon to status label on host event modal
* update status label on wf job output
* update tests for status label changes
* fix default status icon color
<!-- Issues are for **concrete, actionable bugs and feature requests** only - if you're just asking for debugging help or technical support, please use:
- For the roundup of all the different mailing lists available from AWX, Ansible, and beyond visit: https://docs.ansible.com/ansible/latest/community/communication.html
- Hello, we think your question is answered in our FAQ. Does this: https://www.ansible.com/products/awx-project/faq cover your question?
- You can find the latest documentation here: https://docs.ansible.com/automation-controller/latest/html/userguide/index.html
## PRs/Issues
### Visit our mailing list
- Hello, this appears to be less of a bug report or feature request and more of a question. Could you please ask this on our mailing list? See https://github.com/ansible/awx/#get-involved for information for ways to connect with us.
### Denied Submission
- Hi! \
\
Thanks very much for your submission to AWX. It means a lot to us that you have taken time to contribute. \
\
At this time we do not want to merge this PR. Our reasons for this are: \
\
(A) INSERT ITEM HERE \
\
Please know that we are always up for discussion but this project is very active. Because of this, we're unlikely to see comments made on closed PRs, and we lock them after some time. If you or anyone else has any further questions, please let us know by using any of the communication methods listed in the page below: \
\
https://github.com/ansible/awx/#get-involved \
\
In the future, sometimes starting a discussion on the development list prior to implementing a feature can make getting things included a little easier, but it is not always necessary. \
\
Thank you once again for this and your interest in AWX!
### No Progress Issue
- Hi! \
\
Thank you very much for for this issue. It means a lot to us that you have taken time to contribute by opening this report. \
\
On this issue, there were comments added but it has been some time since then without response. At this time we are closing this issue. If you get time to address the comments we can reopen the issue if you can contact us by using any of the communication methods listed in the page below: \
\
https://github.com/ansible/awx/#get-involved \
\
Thank you once again for this and your interest in AWX!
### No Progress PR
- Hi! \
\
Thank you very much for your submission to AWX. It means a lot to us that you have taken time to contribute. \
\
On this PR, changes were requested but it has been some time since then. We think this PR has merit but without the requested changes we are unable to merge it. At this time we are closing your PR. If you get time to address the changes you are welcome to open another PR or we can reopen this PR upon request if you contact us by using any of the communication methods listed in the page below: \
\
https://github.com/ansible/awx/#get-involved \
\
Thank you once again for this and your interest in AWX!
## Common
### Give us more info
- Hello, we'd love to help, but we need a little more information about the problem you're having. Screenshots, log outputs, or any reproducers would be very helpful.
### Code of Conduct
- Hello. Please keep in mind that Ansible adheres to a Code of Conduct in its community spaces. The spirit of the code of conduct is to be kind, and this is your friendly reminder to be so. Please see the full code of conduct here if you have questions: https://docs.ansible.com/ansible/latest/community/code_of_conduct.html
### EE Contents / Community General
- Hello. The awx-ee contains the collections and dependencies needed for supported AWX features to function. Anything beyond that (like the community.general package) will require you to build your own EE. For information on how to do that, see https://ansible-builder.readthedocs.io/en/stable/ \
\
The Ansible Community is looking at building an EE that corresponds to all of the collections inside the ansible package. That may help you if and when it happens; see https://github.com/ansible-community/community-topics/issues/31 for details.
## Mailing List Triage
### Create an issue
- Hello, thanks for reaching out on list. We think this merits an issue on our Github, https://github.com/ansible/awx/issues. If you could open an issue up on Github it will get tagged and integrated into our planning and workflow. All future work will be tracked there. Issues should include as much information as possible, including screenshots, log outputs, or any reproducers.
### Create a Pull Request
- Hello, we think your idea is good! Please consider contributing a PR for this following our contributing guidelines: https://github.com/ansible/awx/blob/devel/CONTRIBUTING.md
### Receptor
- You can find the receptor docs here: https://receptor.readthedocs.io/en/latest/
- Hello, your issue seems related to receptor. Could you please open an issue in the receptor repository? https://github.com/ansible/receptor. Thanks!
### Ansible Engine not AWX
- Hello, your question seems to be about Ansible development, not about AWX. Try asking on the Ansible-devel specific mailing list: https://groups.google.com/g/ansible-devel
- Hello, your question seems to be about using Ansible, not about AWX. https://groups.google.com/g/ansible-project is the best place to visit for user questions about Ansible. Thanks!
### Ansible Galaxy not AWX
- Hey there. That sounds like an FAQ question. Did this: https://www.ansible.com/products/awx-project/faq cover your question?
We'd be happy to help if you can reproduce this with AWX since we do not have Oracle's Linux Automation Manager. If you need help with this specific version of Oracles Linux Automation Manager you will need to contact your Oracle for support.
### AWX Release
Subject: Announcing AWX Xa.Ya.za and AWX-Operator Xb.Yb.zb
- Hi all, \
\
We're happy to announce that the next release of AWX, version <b>`Xa.Ya.za`</b> is now available! \
In addition AWX Operator version <b>`Xb.Yb.zb`</b> has also been released! \
- All code submissions are done through pull requests against the `devel` branch.
- You must use `git commit --signoff` for any commit to be merged, and agree that usage of --signoff constitutes agreement with the terms of [DCO 1.1](./DCO_1_1.md).
- Take care to make sure no merge commits are in the submission, and use `git rebase` vs `git merge` for this reason.
- If collaborating with someone else on the same branch, consider using `--force-with-lease` instead of `--force`. This will prevent you from accidentally overwriting commits pushed by someone else. For more information, see https://git-scm.com/docs/git-push#git-push---force-with-leaseltrefnamegt
- If collaborating with someone else on the same branch, consider using `--force-with-lease` instead of `--force`. This will prevent you from accidentally overwriting commits pushed by someone else. For more information, see [git push docs](https://git-scm.com/docs/git-push#git-push---force-with-leaseltrefnamegt).
- If submitting a large code change, it's a good idea to join the `#ansible-awx` channel on irc.libera.chat, and talk about what you would like to do or add first. This not only helps everyone know what's going on, it also helps save time and effort, if the community decides some changes are needed.
- We ask all of our community members and contributors to adhere to the [Ansible code of conduct](http://docs.ansible.com/ansible/latest/community/code_of_conduct.html). If you have questions, or need assistance, please reach out to our community team at [codeofconduct@ansible.com](mailto:codeofconduct@ansible.com)
@@ -41,8 +43,7 @@ The AWX development environment workflow and toolchain uses Docker and the docke
Prior to starting the development services, you'll need `docker` and `docker-compose`. On Linux, you can generally find these in your distro's packaging, but you may find that Docker themselves maintain a separate repo that tracks more closely to the latest releases.
For macOS and Windows, we recommend [Docker for Mac](https://www.docker.com/docker-mac) and [Docker for Windows](https://www.docker.com/docker-windows)
respectively.
For macOS and Windows, we recommend [Docker for Mac](https://www.docker.com/docker-mac) and [Docker for Windows](https://www.docker.com/docker-windows) respectively.
For Linux platforms, refer to the following from Docker:
@@ -78,17 +79,13 @@ See the [README.md](./tools/docker-compose/README.md) for docs on how to build t
### Building API Documentation
AWX includes support for building [Swagger/OpenAPI
documentation](https://swagger.io). To build the documentation locally, run:
AWX includes support for building [Swagger/OpenAPI documentation](https://swagger.io). To build the documentation locally, run:
```bash
(container)/awx_devel$ make swagger
```
This will write a file named `swagger.json` that contains the API specification
in OpenAPI format. A variety of online tools are available for translating
this data into more consumable formats (such as HTML). http://editor.swagger.io
is an example of one such service.
This will write a file named `swagger.json` that contains the API specification in OpenAPI format. A variety of online tools are available for translating this data into more consumable formats (such as HTML). http://editor.swagger.io is an example of one such service.
### Accessing the AWX web interface
@@ -104,22 +101,40 @@ When necessary, remove any AWX containers and images by running the following:
(host)$ make docker-clean
```
### Pre commit hooks
When you attempt to perform a `git commit` there will be a pre-commit hook that gets run before the commit is allowed to your local repository. For example, python's [black](https://pypi.org/project/black/) will be run to test the formatting of any python files.
While you can use environment variables to skip the pre-commit hooks GitHub will run similar tests and prevent merging of PRs if the tests do not pass.
If you would like to add additional commit hooks for your own usage you can create a directory in the root of the repository called `pre-commit-user`. Any executable file in that directory will be executed as part of the pre-commit hooks. If any of the pre-commit checks fail the commit will be halted. For your convenience in user scripts, a variable called `CHANGED_FILES` will be set with any changed files present in the commit.
## What should I work on?
We have a ["good first issue" label](https://github.com/ansible/awx/issues?q=is%3Aissue+is%3Aopen+label%3A%22good+first+issue%22) we put on some issues that might be a good starting point for new contributors.
Fixing bugs and updating the documentation are always appreciated, so reviewing the backlog of issues is always a good place to start.
For feature work, take a look at the current [Enhancements](https://github.com/ansible/awx/issues?q=is%3Aissue+is%3Aopen+label%3Atype%3Aenhancement).
If it has someone assigned to it then that person is the person responsible for working the enhancement. If you feel like you could contribute then reach out to that person.
Fixing bugs, adding translations, and updating the documentation are always appreciated, so reviewing the backlog of issues is always a good place to start. For extra information on debugging tools, see [Debugging](./docs/debugging/).
**NOTES**
> Issue assignment will only be done for maintainers of the project. If you decide to work on an issue, please feel free to add a comment in the issue to let others know that you are working on it; but know that we will accept the first pull request from whomever is able to fix an issue. Once your PR is accepted we can add you as an assignee to an issue upon request.
**NOTE**
> If you work in a part of the codebase that is going through active development, your changes may be rejected, or you may be asked to `rebase`. A good idea before starting work is to have a discussion with us in the `#ansible-awx` channel on irc.libera.chat, or on the [mailing list](https://groups.google.com/forum/#!forum/awx-project).
**NOTE**
> If you're planning to develop features or fixes for the UI, please review the [UI Developer doc](./awx/ui/README.md).
### Translations
At this time we do not accept PRs for adding additional language translations as we have an automated process for generating our translations. This is because translations require constant care as new strings are added and changed in the code base. Because of this the .po files are overwritten during every translation release cycle. We also can't support a lot of translations on AWX as its an open source project and each language adds time and cost to maintain. If you would like to see AWX translated into a new language please create an issue and ask others you know to upvote the issue. Our translation team will review the needs of the community and see what they can do around supporting additional language.
If you find an issue with an existing translation, please see the [Reporting Issues](#reporting-issues) section to open an issue and our translation team will work with you on a resolution.
## Submitting Pull Requests
Fixes and Features for AWX will go through the Github pull request process. Submit your pull request (PR) against the `devel` branch.
@@ -143,28 +158,14 @@ We like to keep our commit history clean, and will require resubmission of pull
Sometimes it might take us a while to fully review your PR. We try to keep the `devel` branch in good working order, and so we review requests carefully. Please be patient.
All submitted PRs will have the linter and unit tests run against them via Zuul, and the status reported in the PR.
## PR Checks run by Zuul
Zuul jobs for awx are defined in the [zuul-jobs](https://github.com/ansible/zuul-jobs) repo.
Zuul runs the following checks that must pass:
1.`tox-awx-api-lint`
2.`tox-awx-ui-lint`
3.`tox-awx-api`
4.`tox-awx-ui`
5.`tox-awx-swagger`
Zuul runs the following checks that are non-voting (can not pass but serve to inform PR reviewers):
1.`tox-awx-detect-schema-change`
This check generates the schema and diffs it against a reference copy of the `devel` version of the schema.
Reviewers should inspect the `job-output.txt.gz` related to the check if their is a failure (grep for `diff -u -b` to find beginning of diff).
If the schema change is expected and makes sense in relation to the changes made by the PR, then you are good to go!
If not, the schema changes should be fixed, but this decision must be enforced by reviewers.
When your PR is initially submitted the checks will not be run until a maintainer allows them to be. Once a maintainer has done a quick review of your work the PR will have the linter and unit tests run against them via GitHub Actions, and the status reported in the PR.
## Reporting Issues
We welcome your feedback, and encourage you to file an issue when you run into a problem. But before opening a new issues, we ask that you please view our [Issues guide](./ISSUES.md).
## Getting Help
If you require additional assistance, please reach out to us at `#ansible-awx` on irc.libera.chat, or submit your question to the [mailing list](https://groups.google.com/forum/#!forum/awx-project).
For extra information on debugging tools, see [Debugging](./docs/debugging/).
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
